Table of Contents
Advertisement
The configuration files of the device can be exported to local path for backup.
Step 1 Go to Configuration > System > Maintenance > Upgrade & Maintenance.
Step 2 Click Device Parameters of Export section frame and select the local path to save the
configuration file.
10.7 Time Settings
10.7.1 Configure DST Settings
Purpose:
Configure DST (Daylight Saving Time) settings for the system.
Step 1 Go to Configuration > System > System Settings > Time Settings.
Step 2 Check Enable DST.
Step 3 Set Start Time and End Time for DST.
Step 4 Select DST Bias.
Step 5 Click Save.
10.7.2 Configure NTP
Step 1 Go to Configuration > System > System Settings > Time Settings.
Step 2 Select NTP.
Intelligent Analyzer User Manual
Figure 10-3 DST
Figure 10-4 NTP Settings
37
Advertisement
Table of Contents
