Serial Port Settings; Rs-232; Rs-485 - HIKVISION DS-MP1803 User Manual

Step 3 Enter NTP Server address and NTP Port.
Step 4 Enter time synchronization Interval.
Step 5 Click Save.

10.8 Serial Port Settings

Purpose:
Two types of serial ports are provided: RS-232 and RS-485.

10.8.1 RS-232

The RS-232 port can be used in two ways:
 Console: Connect a computer to the device through the computer serial port. Device
parameters can be configured by using software such as HyperTerminal. The serial port
parameters must be the same as of the device when connecting with the computer serial port.
 Transparent Channel: Connect a serial device directly to the device. The serial device will be
controlled remotely by the PC through the network and the protocol of the serial device. If
alarm button is connected, select RS-232 usage as Transparent Channel.
Step 1 Go to Configuration > System > System Settings > RS-232.
Step 2 Edit parameters as required.
Step 3 Click Save.

10.8.2 RS-485

Purpose:
Configure the RS-485 parameters the same with RS-485 device connected to the device.
Step 1 Go to Configuration > System > System Settings > RS-485.
Step 2 Edit parameters as required.
Step 3 Click Save.
Intelligent Analyzer User Manual
38
040300180606