Two periods can be configured for each day.
The time periods cannot be overlapped each other.
Step 4 Click Save.
5.2 Configure Delayed Shutdown
Purpose:
You can set the shutdown delay time (Vehicle Ignition Startup and Shutdown) for the device.
Before you start:
Wire power cord. For details, refer to quick start guide.
Step 1 Go to Configuration > Vehicle > Basic Settings > Start.
Step 2 Select Auto Work Type as Halt Delay.
Step 3 Select Delay Time. The delay time ranges from 0 to 6 hours.
Step 4 Optionally, check Low Power Protect and select Low Power Protect Limit. If the voltage of
the device reaches the selected percentage, the device will shut down automatically.
Step 5 Click OK.
5.3 Configure Satellite Positioning
Purpose:
The built-in GNSS module supports GPS (Global Positioning System), enabling device positioning
and speed limit alarm.
Step 1 Go to Configuration > Vehicle > Basic Settings > Position Settings.
Intelligent Analyzer User Manual
Figure 5-2 Halt Delay
23