Digital Clocks - BOMBARDIER Challenger 601-3A CL-600-2B16 Pilot Training Manual

Each ADF system consists of a receiver, con-
trol unit (Figure16-15), and a shared ADF
antenna. The display controllers provide se-
lection options of either ADF 1 or 2 bearing
information for EHSI display.
SET SWITCH
UP — ADVANCES CLOCK ONE SECOND
FOR EACH SECOND HELD.
D — RETARDS CLOCK ONE SECOND
FOR EACH SECOND HELD.
HOURS AND
MINUTES DISPLAY
TIME SWITCH
TIME — DISPLAYS SELECTED
STANDARD TIME.
F.T. — DISPLAYS FLIGHT TIME.
E.T. — DISPLAYS ELAPSED TIME.
BRIGHT/DIM SWITCH
B — BRIGHTENS DISPLAY.
DIM — DIMS DISPLAY.
1 HR UP — ADVANCES TIME
ONE-HOUR WHEN HELD AND
RELEASED.
UP D B
SET DIM
DAVTRON
TIME
F.
T.
E.T.
M8llB
SECONDS DISPLAY
PILOT'S AND COPILOT'S SIDE PANELS
Figure 16-16. Digital Clock
FOR TRAINING PURPOSES ONLY
FlightSafety Canada
CL-600-2B16 PILOT TRAINING MANUAL

DIGITAL CLOCKS

A 6 VDC battery-powered digital clock on
each instrument panel displays local, flight,
or elapsed time. A BRT–DIM switch provides
day and night illumination options. Each dig-
ital clock system consists of a digital clock and
a P R E S S - TO - R E S E T f l i g h t - t i m e s w i t c h
(Figure 16-16).
1hr
up
PRESS TO
RESET
ZERO
S
T
O
P
RUN
ELAPSED TIME SWITCH
RUN — STARTS ELAPSED TIME METER.
STOP — STOPS ELAPSED TIME METER.
ZERO — RETURNS ELAPSED TIME METER
TO ZERO WHEN HELD AND RELEASED. ALSO
RETURNS FLIGHT TIME METER TO ZERO
WHEN THE AIRCRAFT IS ON THE GROUND.
PRESS TO RESET PUSHBUTTON
ALLOWS FLIGHT TIME RECORDER
TO BE RESET TO ZERO WITHOUT
TURNING OFF AIRCRAFT
ELECTRICAL POWER.
CL 601-3A/R 16-17
L t é e
L t d .