Chapter 2: Mechanical Specifications And Installation - Aerotech AGV3D Series Hardware Manual

AGV3D Hardware Manual

Chapter 2: Mechanical Specifications and Installation

W A R N I N G : AGV3D installation must be in accordance to instructions provided by this
manual and any accompanying documentation. Failure to follow these instructions could result
in injury or damage to the equipment.
W A R N I N G : Do no stare into the laser beam, place your body parts in the beam path, or
expose yourself to reflections from powerful beams.
W A R N I N G : Only a Class 1 HeNe laser is recommended for performing alignments. If this is
not possible, use the lowest power setting on the available laser and employ remote beam
sensing techniques.
W A R N I N G : Wear eye protection. The danger to your eyes increases when optical
instruments are used in conjunction with the scan head.
W A R N I N G : Failure to use the parameter file provided by the factory may result in permanent
mechanical damage to the scan head.
www.aerotech.com
Chapter 2: Mechanical Specifications and Installation
23