Environmental Specifications; Table 1-2: Environmental Specifications - Aerotech AGV3D Series Hardware Manual

1.1. Environmental Specifications

1.1. Environmental Specifications
W A R N I N G : Do not expose this product to environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to the
equipment.
Table 1-2: Environmental Specifications
Ambient
Temperature
Humidity
Altitude
Vibration
Protection
Rating
Use
14
The optimal operating temperature is 20° C ±2° C (68° F ±4° F). If at any time the
operating temperature deviates from 20° C degradation in performance could occur.
Storage: 0° to 40° C (32° to 104° F) in original shipping packaging
Operating: 20% to 60% RH
Storage: 10% to 70% RH, non-condensing in original packaging. The stage should be
packaged with desiccant if it is to be stored for an extended time.
Operating: 0 m to 2,000 m (0 ft to 6,562 ft) above sea level
Contact Aerotech if your specific application involves use above 2,000 m or below sea
level.
Use the system in a low vibration environment. Excessive floor or acoustical vibration
can affect system performance. Contact Aerotech for information regarding your
specific application.
The AGV3D is gasketed at critical interfaces to provide some protection from
contamination due to laser marking and cutting. Dust and fumes generated by the laser
machining process should be removed through exhaust or vacuum systems. Failure to
control this debris could result in rapid contamination of the cover glass and damage to
beam delivery optical components.
Indoor use only
AGV3D Hardware Manual
www.aerotech.com