Figure 2-4: Shipping Clamp Detail - Aerotech AGV3D Series Hardware Manual

2.3. Remove the Shipping Clamp
4. Replace the top cover onto the AGV3D enclosure. Be careful not to pinch any cables when you
reattach the cover.
N O T E : The top cover should be flush with the enclosure. Carefully move any cables that interfere with
the position of the top cover.
5. Attach the top cover with the four [QTY. 4] M3 socket head cap screws that were removed in Step 1.
28
Figure 2-4: Shipping Clamp Detail
AGV3D Hardware Manual
www.aerotech.com