Table of Contents
Advertisement
AGV3D Hardware Manual
Chapter 2: Mechanical Specifications and Installation
IMPORTANT: This manual tells you how to carefully and correctly use and operate the
AGV3D.
l
l
l
If you do not understand the information in this manual, contact Aerotech Global
Technical Support.
DANGER: Use of this product increases the risk of exposure to visible and/or invisible laser
radiation.
l
l
l
WARNING: Aerotech recommends that you only use a Class 1 HeNe laser to do
alignments. If a Class 1 HeNe laser is not available, use the lowest power setting on the
available laser and remote beam sensing techniques.
WARNING: You could cause permanent mechanical damage to the scan head if you do not
use the parameter file provided by the factory.
www.aerotech.com
Chapter 2: Mechanical Specifications and Installation
Read all parts of this manual before you install or operate the AGV3D or before you
do maintenance to your system.
To prevent injury to you and damage to the equipment, obey the precautions in this
manual.
All specifications and illustrations are for reference only and were complete and
accurate as of the release of this manual. To find the newest information about this
product, refer to www.aerotech.com.
Do not stare into the laser beam, put your body parts in the laser area, or expose
yourself to reflections from powerful beams.
Wear certified laser safety eye protection.
Avoid eye or skin exposure to direct or scattered radiation.
29
Advertisement
Table of Contents
