Chapter 2: Mechanical Specifications And Installation - Aerotech AGV-HP Series Hardware Manual

AGV-HP(O) Hardware Manual Chapter 2: Mechanical Specifications and Installation

Chapter 2: Mechanical Specifications and Installation

IMPORTANT: This manual tells you how to carefully and correctly use and operate the
AGV-HP(O).
Read all parts of this manual before you install or operate the galvo or before you do
l
maintenance to your system.
To prevent injury to you and damage to the equipment, obey the precautions in this
l
manual.
All specifications and illustrations are for reference only and were complete and
l
accurate as of the release of this manual. To find the newest information about this
product, refer to www.aerotech.com.
If you do not understand the information in this manual, contact Aerotech Global
Technical Support.
DANGER: Use of this product increases the risk of exposure to visible and/or invisible
laser radiation.
Do not stare into the laser beam, put your body parts in the laser area, or expose
l
yourself to reflections from powerful beams.
Wear certified laser safety eye protection.
l
Avoid eye or skin exposure to direct or scattered radiation.
l
WARNING: Aerotech recommends that you only use a Class 1 HeNe laser to do
alignments. If a Class 1 HeNe laser is not available, use the lowest power setting on the
available laser and remote beam sensing techniques.
WARNING: Use the parameter file provided by the factory to configure the controller or
permanent mechanical damage could occur.
www.aerotech.com 25