Table of Contents
Advertisement
AGV3D Hardware Manual
Chapter 4: Maintenance
The AGV3D scan head is designed to be completely resistant to dust. The scan head does not require any
maintenance other than that it should be cleaned periodicly.
For operation in a dirty or dusty environments, you could have to periodically replace the entrance and exit
aperture protective windows. Contact the factory for replacement parts.
W A R N I N G : Do not remove any components from the system other than those specified in
the Maintenance section of the manual. The internal optical components are precisely aligned at
the factory in a clean environment to achieve high performance. Removal of any components
will significantly compromise performance and can require that you send the scan head back to
the factory for calibration.
N O T E : The scan head must be kept free of foreign matter and moisture; otherwise, the performance
and life expectancy of the scan head will be reduced.
4.1. Service and Inspection Schedule
D A N G E R : To minimize the possibility of bodily injury or death, disconnect all electrical
power prior to performing any maintenance or making adjustments to the equipment.
Inspect the AGV3D at least once per month. A longer or shorter inspection interval may be required
depending on the application and conditions, such as the duty cycle, speed, and environment.
Monthly inspections should include but not be limited to:
Visually inspect the stage and cables.
l
Re-tighten loose connectors.
l
Replace or repair damaged cables.
l
Clean the AGV3D and any components and cables as needed.
l
Repair any damage before operating the AGV3D.
l
Inspect and perform an operational check on all safeguards and protective devices.
l
In general, repair and/or replacement of damaged or malfunctioning components by Aerotech field service
personnel is not possible. Repair typically requires that the unit be returned to the factory. Please contact
Aerotech Global Technical Support for more information.
www.aerotech.com
Chapter 4: Maintenance
47
Advertisement
Table of Contents
