Table of Contents
Advertisement
• Mute: Temporarily turns off the sound.
• Volume: Adjusts the sound level.
• Power On/Off Ring Tone: Turns on or off the ring tone when the projector is
Audio
Settings
The only way to change Power On/Off Ring Tone is setting On or Off here. Setting the sound
mute or changing the sound level will not affect the Power On/Off Ring Tone.
Returns all settings to the factory preset values.
Factory
Default
The following settings will still remain: Keystone, Projector Installation, Light Usage Time,
High Altitude Mode, Security Settings, Baud Rate, Port Selection, HDMI Equalizer,
Digital Shrink & Shift, Wired LAN.
Returns all of the adjustments you've made for the System menu to the factory
Reset System
preset values.
Information
• Native
• Detected Resolution: Shows the native resolution of the input signal.
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Light Mode: Shows the selected mode in the Light Settings menu.
Information
• 3D Format: Shows the current 3D mode.
• Color System: Shows input system format.
• Light Usage Time: Shows the number of hours the light has been used.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the projector serial number.
in startup and shutdown process.
Resolution:
Shows the native resolution of the projector.
Operation (under non-Launcher source)
95
Advertisement
Table of Contents
