Table of Contents
Advertisement
• Port Selection: Press
• Baud Rate: Selects a baud rate that is identical with your computer's so that you
Serial Port
Setting
This function is not available when LAN is selected in the Port Selection menu.
Adjusts the equalizer gain settings for an HDMI signal. The higher the setting, the
HDMI
stronger the gain value. If there are more than one HDMI port on the projector,
Equalizer
select the HDMI port first before adjusting the value.
Returns all of the adjustments you've made for the Settings menu to the factory
Reset Settings
preset values.
System
Language
Sets the language for the On-Screen Display (OSD) menus.
• Standby Mode
Standby
• Auto Disable Network Standby Mode: Allows the projector to disable the
Settings
• Audio Pass Through: The projector can play sound when it is in standby mode
•
Background
• Splash
Settings
• Menu Type: Switches to the Basic OSD menu.
Menu Settings
• Menu Display Time: Sets the length of time the OSD will remain active after
94
Operation (under non-Launcher source)
can connect the projector using a suitable RS-232 cable and update or download
the projector's firmware. This function is intended for qualified service personnel.
• Eco: The projector maintains at standby mode with less than 0.5W power
consumption.
• Network: The projector maintains at network standby mode with less than
2W power consumption.
• Normal: Allows the projector to provide full power, Network, Audio Pass
Through and Monitor Out functions in standby mode.
network function after a set period of time after it enters Network standby
mode. For instance, if 20 min is selected, the projector is able to provide the
network function for 20 minutes after it enters standby mode. When 20 minutes
is up, the projector enters Eco standby mode.
and the corresponding jacks are correctly connected to devices. Press
choose the source that you wish to use. See
make the connection.
Background:
Sets the background color for the projector.
Screen:
Allows you to select which logo screen will be displayed during
projector start-up.
your last key press.
/
to select the serial port.
Connection on page 18
/
to
for how to
Advertisement
Table of Contents
