Table of Contents
Advertisement
Fine-tuning the image clarity
Sharpen the image by rotating the focus ring.
Correcting keystone
Keystoning refers to the situation where the projected image becomes a trapezoid due to angled
projection.
To correct this, you will need to manually correct it following these steps.
1. Do one of the following steps to display the keystone
correction page.
• Press
/
on the projector or remote control.
• Go to Advanced Menu - Display > Keystone and press
OK.
2. After the Keystone correction page displays. Press
image. Press
to correct keystoning at the bottom of the image.
Press
to correct keystoning at the top of the
Positioning your projector
Press
.
.
17
Advertisement
Table of Contents
