Table of Contents
Advertisement
5. To end the connection / broadcasting, click the
device's YouTube screen.
Available on Firmware version v01.00.17.00 or later.
Wireless Hotspot
In situations where the projector is out-of-range of a wireless network (for example while on a camping
trip), you can configure the projector to act as a wireless hotspot to create a closed network for
devices to connect directly to the projector via a wireless connection and to project files from their
local storage.
The projector will have no access to the Internet while in wireless hotspot mode.
To create a wireless hotspot:
1. Install the wireless dongle provide into the wireless dongle port (see
).
8
2. Power on the projector (see
3. On the home screen of the BenQ Launcher interface select the Settings button and press OK.
4. Select Hotspot and press OK.
48
Operation (under Launcher source)
Starting up the projector on page 20
icon on the upper-right corner of your
Installing the wireless dongle on page
).
Advertisement
Table of Contents
