Table of Contents
Advertisement
Operation (under non-Launcher source)
Using the projector menus under non-Launcher source
When the input signal is HDMI or PC/YPbPr, you can use 2 types of On-Screen Display (OSD)
menus for making various adjustments and settings.
• Basic OSD menu: provides primary menu functions. (See
• Advanced OSD menu: provides full menu functions. (See
To access the OSD menu, press
• Use the arrow keys ( / / / ) on the projector or remote control to move through the menu
items.
• Use OK on the projector or remote control to confirm the selected menu item.
The first time you use the projector (after finishing the initial setup), Basic OSD menu displays.
The OSD screenshots below are for reference only, and may differ from the actual design.
Below is the overview of the Basic OSD menu.
1
Brightness
Aspect Ratio
Auto
2
Picture Mode
Presentation
Volume
Enter
3
4
If you intend to switch from the Basic OSD menu to the Advanced OSD menu, follow the
instructions below:
1. Go to Basic Menu > Menu Type.
2. Press OK and press
may access the Advanced OSD menu by pressing
on the projector or remote control.
Basic Menu
Light Mode
SmartEco
Wireless LAN
Information
Menu Type
Exit
5
/
to select Advanced. Next time when you turn on the projector, you
Basic menu on page
Advanced menu on page
Menu Type
1
Main menu
2
2
Current input
3
signal
6
.
Operation (under non-Launcher source)
85)
87)
Press OK to enter
4
the menu.
Status
5
Press
to go to
the previous page or
6
to exit.
73
Advertisement
Table of Contents
