Table of Contents
Advertisement
No.
22. CONTRAST
23. LIGHT MODE
24. AUTO
Operating the LASER pointer
The Laser Pointer is a presentation aid for professionals. It emits red colored light when
you press it. The laser beam is visible. It is necessary to press and hold LASER for
continuous output.
The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and
keep this remote control out of the reach of children.
Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning
messages on the back of the remote control prior to using it.
Remote control effective range
The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR
remote control sensor(s) to function correctly. The distance between the remote control and the
sensor(s) should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor(s) on the
projector that might obstruct the infra-red beam.
• Operating the projector from the front
12
Introduction
When the input source is
BenQ Launcher
Adjusts contrast.
Displays the Light Mode menu for selecting a suitable light
operating mode.
(Not available.)
• Operating the projector from the top
When the input source is
NOT BenQ Launcher
Automatically determines the
best picture timings for the
displayed image when PC signal
(analog RGB) is selected.
Advertisement
Table of Contents
