Figure 21 Replacing The Pump Hose - M&C CSS Series Instruction Manual

Figure 21 Replacing the pump hose
Unplug gas conditioning unit from the mains;
•
Remove hose connections on the pump;
•
Squeeze belt using the handles and turn the S-latch clockwise until it stops;
•
• Remove the belt and pull the old pump tubing on the slip fittings out of the guides;
Squeeze the pressure rollers and see if spring tension exists; if not, change pressure springs
•
(see Section 18.3.3);
• Insert new pump hosewith slip fittings into the guides  of the belt;
Warning
Insert belt complete with the new hose into the dovetail of the pump body; Squeeze the belt
•
at the handles and simultaneously turn the S-latch  counter clockwise until it clicks;
Switch pump on.
•
www.mc-techgroup.com
Only the use of original spare pump hose ensures proper function.
Never lubricate the pump hose.
Check all parts for dirt before assembling the hose pump and clean if
necessary.
CSS-VC-1.6 | 1.01.03 49