Display Of Events - M&C CSS Series Instruction Manual

Parameters: Default setting
Start in: 0 d 0 h 0 m
Flushing time T1 30 s
Dead time 60 s
Interval T2 24 h
On time T3 1 s
Off time T4 5 s
Pulse number 10
Activation Off
16.4

DISPLAY OF EVENTS

By 4 x pressing (3 x without backflush module) of the arrow key
key, the event list appears in which the last 32 error messages and warnings are listed on 8 pages.
The individual pages can be seen by using the arrow keys
At the bottom of the list of events, furthermore, the error-free time and the total run time (operating time
counter) are displayed. The error-free time indicates how much time has passed since the last error.
The total running time indicates how long the device has been running since the last service.
If service reset is performed, the error messages are erased and the times reset.
During a power failure, the data remains stored.
36
Info
Max.: 9 T 23 h 59 m
Max.: 99 m 59 s
����2 = 2 ∗ ����1 + ���������������� ���� ���� ���� ���� + 1 ����
0-120s
������������
Max.: 99 s ����3 ≤ (����1 − 1 ����)
Max.: 99 s
Is only calculated and cannot be < 1
CSS-VC-1.6 | 1.01.03
and then 1 x pressing of the PRG
.
www.mc-techgroup.com