Setting Service Interval, Language, Control Temperatures And Temperature Sensor Types - M&C CSS Series Instruction Manual

16.7 SETTING SERVICE INTERVAL, LANGUAGE, CONTROL TEMPERATURES AND
TEMPERATURE SENSOR TYPES
To change service interval, language, control temperatures and temperature sensor types:
Disconnect the device from the mains.
•
Hold the PRG key
•
is displayed. The following is displayed (2nd screen
Select the parameter
•
key.
Use the arrow keys,
•
PRG key . Press and hold down the PRG key
38
down and switch the device back on until the message to release the key
to be changed using the arrow key
the settings and values can be changed and confirmed with the
CSS-VC-1.6 | 1.01.03
):
and confirm using the PRG
for 5 seconds to apply all changes.
www.mc-techgroup.com