(F) Board Configuration Display - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 14
4–3–3 Utility Menu (continued)
(E) USER OPTION DISPLAY (continued)
This following three (3) options are available only for the console with the system software version 4.20
or later.
This following option is available only for the console with the system software version 5.00 or later.
This following option is available only for the console with the system software version 6.00 or later.
This following option is not available in USA and Europe.

(F) BOARD CONFIGURATION DISPLAY

This displays the configurations of all PC boards installed in the console. This also displays the version and
capacity of memory (only operator usable memory) for each installed board.
Type 6 and then press Return key when the Utility Menu is displayed. The Board Configuration Display is dis-
played as shown in ILLUSTRATION 4–19 and ILLUSTRATION 4–19b.
Item 38: ATO
Item 39: THI
Item 40: 3DvieW–3(3D–Surface)
Item 41: PFD
Item 42: Contrast Imaging
Item 43: Contrast Imaging (ECG trig)
BOARD CONFIGURATION DISPLAY (a)
ILLUSTRATION 4–19
Note
Note
Note
4–26
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS