Diagnostics; Service Software Menu - GE LOGIQ 500 Service Manual

GE MEDICAL SYSTEMS
REV 0
4–3 DIAGNOSTICS
4–3–1 Service Software Menu
1. Select the Set Up function by pressing the Top Menu Select button located above the Set Up section as shown in
ILLUSTRATION 4–6.
2. Pressing the position of the Sub–Menu Select key located under the ECG section selects User Diagnostics
function and the Diagnosis Menu is displayed on the CRT monitor. Refer to ILLUSTRATION 4–7. Pressing the
position of the Sub–Menu Select key located under the Set Up section selects User Utility function and the
Utility Menu is displayed on the CRT monitor. Refer to ILLUSTRATION 4–12.
MENU PANEL
ILLUSTRATION 4–6
4–9
LOGIQ 500 SERVICE MANUAL
P9030TA
FUNCTIONAL CHECKS