Matters Need Attention; Dimension Data - Gree GRS-CQ6.0Pd/Na-K Service Manual

AIR-TO-WATER HEAT PUMP
on the wall with bolts to avoid vibration, as shown in the following figure. Weight
capacity of water tank during installation should also be considered.
The minimum clearance from the water tank to combustible surface must be 500mm.
There should be water pipe, hot water joint and floor drain near the water tank in favor
of water replenishment, hot water supply and drainage of water tank.
Connection of inlet/outlet waterway: Connect the safety check valve attached with the
unit (→ points at insulated water tank) with the water inlet of water tank with PPR pipe
according to the following figure, sealing with unsintered tape. The other end of the
safety check valve should connect with tap water joint. Connect the hot water pipe
and water outlet of water tank with PPR pipe.

1.2 Matters Need Attention

The installation of unit must be in accordance with national and local safety codes.
Installation quality will directly affect the normal use of air conditioner unit. The user is
prohibited from installation by himself. Please contact your dealer after buying this
machine. Professional installation workers will provide installation and test services
according to installation manual.
Do not connect to power until all installation work is completed.

1.3 Dimension Data

1.3.1 Outdoor
GRS-CQ6.0Pd/Na-K(O),GRS-CQ8.0Pd/Na-k(O),GRS-CQ10Pd/Na-K(O)：
INSTALLATION
66