Gree GRS-CQ6.0Pd/Na-K Service Manual page 145

AIR-TO-WATERHEATPUMP
7) Remove the
motor
・Loosen the screws
fixing the motor
support. Remove the
motor support.
Loosen the wire of
motor, and pull it
through the hole.
Remove the motor.
[See Fig. 10]
8) Remove the
4-way valve
Remove the 4-way
valve
・Loosen the screws
fixing the coil of
4-way valve。
・Remove the coil of
4-way valve。
・Unsolder the tubes
connected to the
4-way valve.
・Remove the 4-way
valve.[See Fig.11]
Note： When welding,
the valve
should be
covered by
wet cloth in
order to avoid
the high
temp.
damage.
Fig.10
Fig.11
MAINTENANCE
139