Gree GRS-CQ6.0Pd/Na-K Service Manual page 33

AIR-TO-WATER HEAT PUMP
Press button to select the function code that you want to set.
2)
3) button to enter function parameter setting mode. The function
Press
parameter is flashing.
4) Press button to adjust desired parameter.
5) Press button to save the desired parameter.
6) Repeat step 2 to 5 to set other function parameter, or press
button to return to the main menu.
Function description
Code
Setting interval of defrost
1
mode
Setting duration of defrost
2
mode
Setting
3
preventing freezing operation
Setting exit temperature of preventing
4
freezing operation
Setting enter temperature of anti-high
temperature operation
5
Setting exit temperature of anti-high
temperature operation
6
Setting enter temperature of defrost
7
operation
Setting exit temperature of defrost
8
operation
The table of user function parameter
enter temperature
Detail
/ 30~60minute(default:50)
/ 1~15minute(default:10)
of
/ 1～5 (default:3 )
/ 6～14 (default:12 )
/ 55～60 (default:58 )
/ 40～54 (
/ -10～0 (default:
/ 5～30 (default:15 )
CONTROL
button or
Range
℃ ℃
℃ ℃
℃ ℃
℃ default:53 ) ℃
℃ ℃
-4 )
℃ ℃
29