Gree GRS-CQ6.0Pd/Na-K Service Manual page 35

AIR-TO-WATER HEAT PUMP
leaving water temperature (solar kit is installed)
③ Room temperature setting is available when you have selected room temperature
as control target.
④ Please refer function code 01.
⑤ In heating mode, if weather depending mode is activated, you can't set the room
temperature or outflow water temperature.
⑥ In heating mode , there are two Heating operation level:
high temperature cycle
low temperature cycle
⑦ Please refer to In function code 19 ;
3) Adjust desired temperature by pressing
Note:
①
: Increase 1°C or 1°F for each press.
②
: Decrease 1°C or 1°F for each press.
4) Press button to save the setting target temperature and return to the main
menu.
The range of the setting temperature
Temperature
Outflow water temperature（NO FCU）
Outflow water temperature（FCU）
Outflow water temperature
Room temperature
Room temperature
Sanitary water tank temperature
button.
Mode
cool
cool
high temperature cycle
Heat
low temperature cycle
cool
heat
/
CONTROL
(unit: )
℃
Temperature range
18~25(default:18)
7~25(default:7)
25~55(default:40)
25-45(default:40)
18~30(default:20)
18~30(default:26)
40~80(default:50)
31