Gree GRS-CQ6.0Pd/Na-K Service Manual page 140

AIR-TO-WATERHEATPUMP
② . Remove liquid
valve
・Loosen the bolts
fixing the liquid valve.
・Unsolder the pipe
connected to the
liquid valve
[See
Fig.13]
Note：When welding,
the valve should be
covered by wet cloth
in order to avoid the
high temp damage.
9)Remove
compressor and
gas-liquid separator
Remove the
・
connection wire of
compressor
Unsolder the
・
suction pipe and
discharge pipe.
・ Loosen the bolts
fixing the compressor
and remove the
compressor and
gas-liquid separator.
[See Fig.13]
Fig.13
Fig.14
MAINTENANCE
134