AIR-TO-WATER HEAT PUMP
Step 3: Set timing temperature of the second period
1)
The last timing temperature of the first period is defaulted. (The defaulted time is 17:
00 upon initial energization. If the reference point is indoor temperature, the defaulted
temperature is 20
water temperature, the defaulted temperature is 18
heating.) Press "▲" and "▼" button to adjust starting hour. Press "Set" to save the
adjustment and to set starting minute of second period.
for cooling and 26
℃
for heating. If the reference point is outflow
℃
℃
for cooling and 40
CONTROL
℃
for
57