AIR-TO-WATER HEAT PUMP
Step 2: Set timing temperature of the first period
1)
The last timing temperature of the first period is defaulted. (The defaulted time is 8:
00 upon initial energization. If the reference point is indoor temperature, the defaulted
temperature is 20
water temperature, the defaulted temperature is 18
heating.) Press "▲" and "▼" button to adjust starting hour. Press "Set" to save the
adjustment;
for cooling and 26
℃
for heating. If the reference point is outflow
℃
for cooling and 40
℃
CONTROL
for
℃
54