Numeric Keypad - Editing Procedure For Numeric Values (480 Plus Only); Indicator Operations; Menu; Zero Scale - Rice Lake 480 Legend Series Technical Manual

480 Legend Series Weight Indicator
1.7.3

Numeric Keypad - Editing Procedure for Numeric Values (480 Plus Only)

With the numeric keypad option, the method for editing numeric values relies on the numbers which are embossed on the
keypad rather than using the navigation arrows.
1. When editing numeric values, insert the required value using the numeric keypad.
2. Press Tare to save the value entered and return to the level above.
i. Press
ii. Press
When editing fractional numeric values, the decimal point must be positioned in accordance with the primary units
Note
formatting, otherwise the keyed number may be rejected by the software.
1.8

Indicator Operations

Basic 480 operations are summarized below.
1.8.1

Menu

Press , MENU will be displayed, See
MENU
Press then or to select the following parameters:
• Audit Trail, See Section 1.8.9 on page 8
• Display Tare, See Section 1.8.6 on page 7
• Unit ID, See Section 1.8.10 on page 8
• Accumulator, See Section 1.8.11 on page 8
• Time and Date, See Section 1.8.12 on page 9
• Setpoints, See Section 1.8.13 on page 9
• Serial, See Section 3.1.2 on page 27
• Print Formats, See Section 7.0 on page 58
• USB, See Section 9.8 on page 67
• Ethernet, See Section 9.9 on page 68
• Version, See Section 1.8.14 on page 9
• Miscellaneous (Power Option), See
Press repeatedly to return to the weigh mode.
Note
Menus may be password protected, See
1.8.2

Zero Scale

1. In Gross mode, remove all weight from the scale and wait for the
2. Press . The
ZERO
1.8.3

Toggle Units

Press to toggle between primary and secondary units. The current unit annunciator will be lit.
UNIT
www.RiceLake.com
6 Visit our website
Figure 1-6. Numeric Keypad for the 480 Plus
to set the currently selected digit to 0
to enter a decimal point
Section 3.1 on page 24
Section 3.1.7 on page 33
Section 1.8.15 on page 10
annunciator lights to indicate the scale is zeroed.
for more information.
to setup a password.
annunciator to light.