Ups Settings - Njoy Balder Series User Manual

5.5

UPS Settings

Parameter 1
88
Vac
8 8 8 8 8 8
Parameter 2 Parameter 3
There are three parameters to set up the UPS. Refer to fol-
lowing diagram.
• Parameter 1: For program alternatives. There are 16 pro-
grams to set up. Refer to the table below.
• Parameter 2 and 3: The settings options or values for each
program.
NOTE:
Most of Balder UPS parameters can be set-up only
on Bypass mode (see below table); please be sure you are in
Bypass mode and then press and hold Test/Up + Mute/Down
Buttons simultaneous more than 1s to enter the setting menu
(see section 5.1 for details).
Programs available list for parameter 1:
Bypass/
Description Code No AC ECO CVCF Battery
output
Output
01 Y
voltage
Output
02 Y
frequency
Voltage range
03 Y
for bypass
Frequency
range for 04 Y
bypass
26
Vac
Battery
Test
Bypass/
Description Code No AC ECO CVCF Battery
output
ECO mode
enable/ 05 Y
disable
Voltage range
06 Y
for ECO mode
ECO mode
frequency 07 Y
range setting
Bypass mode
08 Y Y
setting
Battery backup
09 Y Y
time setting
Reserved 10
Reserved 11
Hot standby
function 12 Y Y
enable/disable
Battery
voltage 13 Y Y
adjustment
Charger
voltage 14 Y Y
adjustment
Inverter
voltage 15 Y
adjustment
Output
voltage 16 Y
calibration
*Y means that this program can be set in this mode.
NOTE:
All parameter settings will be saved only when UPS
shuts down normally. Normal UPS shutdown means turning off
input breaker in bypass mode.
Battery
Test
Y Y Y Y
Reserved for future use
Reserved for future use
Y Y Y Y
Y Y Y Y
Y Y Y Y
Y Y
Y Y
27