Important Safety Warnings - Njoy Balder Series User Manual

Back View
Balder 6000 / 10000
2
1
12
Diagram 1: UPS Rear Panel
15 14
Diagram 2: 2U battery pack
1. Share current port (only
available for parallel
model)
2. Parallel port (only available
for parallel model)
3. External battery connector
4. Intelligent slot
5. RS-232 communication port
6. USB communication port
7. Emergency power off
function connector (EPO
connector)
06
5 6 7 13
4
3
8
9 11
10
15 14
Diagram 3: 3U battery pack
8. Input circuit breaker
9. Output terminals
10. Ground
11. Input terminals
12. Cooling Fan
13. External maintenance
bypass switch port
14. Battery pack output circuit
breaker
15. External battery connector
3

Important Safety Warnings

Please comply with all warnings and operating
instructions in this manual strictly. Save this manual
properly and carefully read the following instructions
before installing the unit. Do not operate this unit before
reading through all safety information and operating
instructions carefully:
Transportation

Please transport the UPS system only in the original
package to protect against shock and impact.
Preparation

Condensation may occur if the UPS system is moved
directly from cold to warm environment. The
UPS system must be absolutely dry before being
installed. Please allow at least two hours for the
UPS system to acclimate to the environment

Do not install the UPS system near water or in moist
environments.

Do not install the UPS system where it would be
exposed to direct sunlight or near heat sources.

Do not block ventilation holes in the UPS housing.
07