Mask; Gateway; Http Port; Email - urmet domus 1093 Quick Manual

4 video channel dvr h.264 4cif
Hide thumbs Also See for 1093:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 32
2.4.1.3

Mask

Use this option to set the subnet mask of the device.
Press "EDIT" and use number keys 09 to enter the mask number. Use "◄►" to shift the cursor. Press "ENTER" to confirm or
"ESC" to cancel.
2.4.1.4

Gateway

This option can be used to set the gateway of the device.
Press "EDIT" and use number keys 09 to enter the address. Use "◄►" to shift the cursor. Press "ENTER" to confirm or "ESC"
to cancel.
2.4.1.5

Http port

This option can be used to set the port number used for the Internet Explorer browser. The default setting is 80.
Press "EDIT" and use number keys 0-9 to enter the port number. Use "◄►" to shift the cursor. Press "ENTER" to confirm or
"ESC" to cancel.
2.4.1.6

Email

It is now possible to send Email (with snapshots attached) when events (i.e. Motion Detection, Sensor, Tampering, Video Loss)
are triggered.
2.4.1.7

Advanced settings

Select "ADVANCED SETTINGS" and press "ENTER" to access advanced settings.
2.4.1.7.1

NTP

This function permits the time synchronization of the DVR through Internet. The user has to indicate the NTP Host chosen for
the synchronization (based on his own time zone).
Proper configuration of Web Port, Data Port, IP address, Gateway and IP DNS of the DVR must be guaranteed for the correct
use of the NTP function.
2.4.1.7.2

IP server

For future application.
2.4.1.8

PPPoe

This option is used to enable PPPoE dial- up functions.
To enable, select the respective check box using "◄►" and press "ENTER" or "EDIT".
Symbol "" indicates that the PPPoE function is enabled; symbol "×" indicates that it is not.
The following can be defined after enabling the "PPoE" option:
user

password

verify

This option is used to enter the user name for PPPoE authentication.
The user name may consist of up to 32 characters.
This option is used to enter the password for PPPoE authentication.
The password may consist of up to 14 characters.
This option is used to enter the password again for PPPoE authentication.
2.4.1.9

DDNS

The use of this function is not suggested. It is better to use the same function available on the ADSL Router.
DS1093-029
User
Password
Verify
46

Advertisement

Table of Contents
loading

This manual is also suitable for:

1093/061svn

Table of Contents