Menu Trasparency; Vga Resolution; Date; Time - urmet domus 1093/064 Quick Manual

4 channel video/audio looping dvr h.264 cif/2cif; 8 video channel dvr h.264 cif/2cif; 16 channel video/audio looping dvr h.264 cif/2cif
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 29
2.1.1.4

Menu trasparency

This option can be used to vary the OSD menu transparency level.
Use "▲▼" to select. Possible selections: "1:1", "3:1" and "1:3".
3:1 indicates that the OSD prevails (by approximately three times) over the previous display; 1:3 indicates the opposite.
2.1.1.5

VGA resolution

This option is used to set resolution and refreshing frequency of the VGA video output (used to connect the DVR to the VGA
monitor).
Use "▲▼" to select.
Possible selections: "800x600/60Hz", "800x600/75Hz" and "1024x768/60Hz".
2.1.1.6

Date

This option is used to set the current date in day/month/year format.
Press "◄►" to select the day, month, year.
Use the number keys 0÷9 on the front panel to enter the date.
2.1.1.7

Time

This option is used to set the current time in hour/minute/second format.
Press "◄►" to select hours, minutes, seconds.
Use the number keys 0÷9 on the front panel to enter the time.
2.1.2

SCREEN MENU ADVANCED SETTINGS

Position the "Active Frame" on the "SETUP" icon and press "ENTER".
The following window will appear:
This page contains the advanced menu settings.
Select "SETUP" and press "ENTER" to access advanced settings.
The selected item is highlighted.
Press arrows "◄►" to point the cursor to the various menu items.
Select "CONFIRM" and press "ENTER" to make the changes effective.
Select "CANCEL" and press "ENTER" to cancel the changes.
Press "ESC" to go back by one step.
Press "ESC" several times until the configuration window closes to quit the configuration menu.
2.1.2.1

Unit name

This option can be used to assign a name to the DVR device. The unit name is a 32 character combination.
The default name is "URMET DVR DVS".
Press "EDIT" to access edit mode. The character input bar will appear in the lower part of the screen.
Press "ENTER" to quit edit mode.
The following character types can be entered:
numeric
upper case alphabetic
lower case alphabetic
symbolic
DS1093-013
Figure 25: display menu (advanced settings)
36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1093/0651093/066

Table of Contents