Advanced; Maintain; Exceptions - urmet domus 1093/004H User Manual/Instructions

2.4.8

ADVANCED

2.4.8.1

Maintain

Click [Main menu Advanced Maintain] to enter into the maintain interface shown as below.
Auto Maintain: You can enable the auto maintain function regularly as per user's need.
•
Auto Reboot: you can also set system auto reboot regularly (daily/weekly/monthly) as per user's need.
•
Load Default: If [Load Default] is selected, you can initialize the system to the ex-factory default.
•
Reboot: Click [Reboot] button to manually restart DVR system.
•
Shutdown: Click the [Shutdown] button to shutdown the device.
•
System Upgrade:
•
1. You can insert a USB memory with "dvrupgrade" folder into USB port of DVR for updating as shown below.
2. Do not take out the USB memory or break the power during the update.
3. When the update is done, system will be automatically restarted.
4. Please manually recovery ex-factory default after system rebooting.
IMPORTANT NOTE:
It is strongly recommended to Backup the record files stored in the Hard Disk before Upgrade Firmware
Version. After Backup Process, the files shall be played using the Player Software present in the old Firmware
Release.
After Uploading Default Settings please set again the Basic Configurations (i.e. Video Out Control, Language,
Date/Time and Record Parameters, etc.)
2.4.8.2

Exceptions

Click [Main menu Advanced Event] to enter into the <Event> interface shown as below
Event Type: support the three abnormal types: Disk No Space, Disk Error and Video Loss.
•
Enable Exception: allow you activate abnormal alarm.
•
Alarm out: allow you connect external alarm sensor. Select [Enable] or [Disable].
•
Alarm Out Time: you can set how long the external sensor alarm will last when the exception is detected (10sec, 20sec,
•
40sec, and 60sec);
Show icons: You can set show the icon on the screen when the exception is detected. About icons type please refer to
•
Section 4.
Buzzer time: you can set how long the buzzer will sound when the exception is detected (OFF, 10sec, 20sec, 40sec,
•
60sec);
Send Email: Allows you set the alarm images is issued to a specified email.
•
Event Type
HDD Loss When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD auto-overwrite
/ HDD No Space is off, and free space is not enough, an alarm will be triggered.
Sends alarm when DVR can't receive video signal (such as camera damage, cable broken or
Video Loss
damaged or power supply malfunction).
DS1093-095
Function
51