Table of Contents
Advertisement
3.4.12
ADVANCED
3.4.12.1
Maintain
Click on [
Main menu Advanced
Default User: if this parameter is set to "Admin" (default setting), the cameras can be viewed after having
•
initialised the NVR with the enabled Administrator password. If this parameter is set to "OFF", the cameras will
not appear after initialisation of the NVR with the enable Administrator password.
Auto Reboot: the user can set periodic automatic system reboots (daily/monthly/weekly) according to needs.
•
Upgrade: this function decompresses the update file package and copies the "hNVRupgrade" folder (see figure
•
above; the update program is inside) into the root directory of the U flash drive; insert the USB flash drive in the U
port of the NVR; click on <Upgrade>.
Load Default: if the [Load Default] option is selected, the system can be initialised according to default
•
parameters. Click on "Load Default" and select the items to be restored.
DS1098-019A
Maintain
] to access the interface shown below.
51
Advertisement
Table of Contents
