It's Good To Know; Power Supply - mikroElektronika EasyAVR v7 User Manual

It's good to know

ATmega32 is the default microcontroller!
Atmel® AVR® 8-bit ATmega32 in DIP is the default chip of
EasyAVR v7. It has up to 16 MIPS
™
2K byte
Flash program memory,
and 1K byte of EEPROM memory. It has 40-pin with 32
I/O pins, 10-bit Analog-to-Digital converter
General purpose
with up to 8 channels (ADC), two 8-bit and one 16-bit
timers/counters (with separate prescalers, compare mode
and capture mode), four PWM channels, programmable serial
USART, Master/slave SPI
and two-wire
calibrated 8 MHz RC and 32 KHz RTC oscillator. It also has
JTAG interface for programming/debugging.
Package contains
1
Damage resistant
protective box
EasyAVR
v7
- Great choice for both beginners
and professionals
operation, 32K bytes of
- Rich with modules
of internal SRAM memory
- Enough RAM and Flash
- Comes with examples for
mikroC, mikroBasic and
mikroPascal compilers
I C
interface, internal
2
2 3
EasyAVR v7 board in
™
antistatic bag
4
USB cable User Manuals and
Board schematic
System Specification

power supply

7–12V AC or 9–15V DC
or via USB cable (5V DC)
power consumption
~80mA when all peripheral
modules are disconnected
board dimensions
266 x 220mm (10.47 x 8.66 inch)
weight
~438g (0.966 lbs)
PRODUCT DVD
www.mikroe.com
www.libstock.com
Copyright ©2012 Mikroelektronika.
All rights reserved. MikroElektronika, MikroElektronika logo and other
MikroElektronika trademarks are the property of MikroElektronika.
All other trademarks are the property of their respective owners.
Unauthorised copying, hiring, renting, public performance
and broadcasting of this DVD
is strictly prohibited.
5
DVD with examples
and documentation
page 5