Installing Programmer Drivers - mikroElektronika EasyAVR v7 User Manual

Installing programmer drivers

On-board mikroProg requires drivers in order to work.
™
Drivers are located on the Product DVD
with the EasyAVR v7 package:
™
PRODUCT DVD
DVD://download/eng/software/
www.mikroe.com
www.libstock.com
development-tools/avr/avrprog2/
avrprog2_drivers_v200.zip
Copyright ©2012 Mikroelektronika.
All rights reserved. MikroElektronika, MikroElektronika logo and other
MikroElektronika trademarks are the property of MikroElektronika.
All other trademarks are the property of their respective owners.
Unauthorised copying, hiring, renting, public performance
and broadcasting of this DVD
is strictly prohibited.
When you locate the drivers, please
extract files from the ZIP archive. Folder with extracted
files contains sub folders with drivers for different
operating systems. Depending on which operating system
you use, choose adequate folder and open it.
In the opened folder you should
be able to locate the driver
setup file. Double click on setup
file to begin installation of the
programmer drivers.
page 12
that you received
Step 1 - Start Installation
Welcome screen of the installation. Just click on
button to proceed.
Step 3 - Installing drivers
Drivers are installed automatically in a matter of
seconds.
Step 2 - Accept EULA
Next Carefully read End User License Agreement. If you
agree with it, click Next to proceed.
Step 4 - Finish installation
You will be informed if the drivers are installed correctly.
Finish
Click on button to end installation process.
EasyAVR
v7