Introduction - mikroElektronika EasyAVR v7 User Manual

Four Connectors for each port
Amazing connectivity
EasyAVR ™ v7 is all about
connectivity. Having four
different connectors for
each port, you can connect
accessory boards, sensors and
your custom electronics easier
then ever before.
page 4
Everything is already here
mikroProg on board
™
Powerful on-board mikroProg
™
programmer can program about
65 AVR® microcontrollers
from Atmel®. You will need it,
whether you are a professional
or a beginner.

Introduction

EasyAVR is your old friend. It has been here for you for several generations.
™
Today it has many users among students, hobbyists, enthusiasts and
professionals. We asked ourselves what else could be done to make such
a great board even greater. As a result some brilliant changes have been
made. We focused all of our creativity and knowledge on making a
revolutionary new design different from any previous version of the
board. We have gone through the process of fine tuning the board
performance, and used 4-layer PCB to achieve maximum efficiency. We
now present you with the new version of EasyAVR - a powerful, well
organized board with on-board programmer - ready to be your strong
3.3V and 5V power supply
Dual Power Supply
EasyAVR ™ v7 is among few
development boards which
support both 3.3V and 5V
microcontrollers. This feature
greatly increases the number of
supported MCUs. It's like having
two boards instead of one!
ally in development.
EasyAVR development Team
™
For easier connections
mikroBUS support
™
Just plug in your Click ™ board,
and it's ready to work. We
picked up a set of the most
useful pins you need for
development and made a
pinout standard you will
enjoy using.
EasyAVR
v7