Installation In Kitchen - Elba P6D Instructions For Use Manual

INSTALLATION IN KITCHEN

CABINET WITH DOOR
It is recommended that a 30 mm clear-
ance be left between the cooker top and
the fixture surface (fig. 4.5).
FASTENING THE INSTALLA-
TION BRACKETS
Each cooker top is provided with an
installation kit including brackets and
screws for fastening the top to fixture
panels from 2 to 4 cm thick.
Turn the cooker top upside down and
fasten the brackets "A" to the
appropriate socket holes, without
tightening the screws "B" for the
moment.
Make sure that the brackets are
fastened as shown in figure 4.6.
FASTENING THE COOKER
TOP
(fig. 4.6)
Spread the sealing material "C" out
along the fixture hole, making sure
that the junctions overlap at the cor-
ners.
Insert the cooker top into the hole and
position it correctly.
Adjust the position of the brackets "A"
and tighten screws "B" to block the
cooker top firmly in position.
With a sharp cutter or trimmer knife
trim the excess sealing material
around the edge of the cooker top.
18
@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
(fig. 4.5)
@ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @
(fig. 4.6)
Clearance
Door
Space for
connections
B
Fig. 4.6
Fig. 4.5
C
A