Elba P6D Instructions For Use Manual page 14

CLEANING THE TRIPLE
RING BURNER
(for model with inner slits only)
Pay special attention to this burner: the
four holes around the outside of the
crown must always be kept clean.
When cleaning, remove the flame
divider (fig. 3.6) and use a cotton bud,
toothbrush, or some other item to clean
out any incrustations or dirt from the four
holes marked "H" (fig. 3.7).
This procedure is necessary to ensure
the burner functions correctly.
H
Fig. 3.7
Fig. 3.6
14