Restore Factory Settings; View Info - Uniden UIP300 Administrator's Manual

Restore Factory Settings

This option restores the default settings and configurations that were set at
the factory.
To restore the factory settings:
1. From the standby mode screen, press the Menu button in the standby
mode. The Setup Menu is displayed.
2. Use the L or M keys to access the Configuration submenu.
3. Use the L or M keys to access the Restore Factory Setting option.
4. Press Select.
5. When prompted, enter the password (default: 654321) and press Select.
The Restore Confirmation screen is displayed.
To cancel the restoration process, press Cancel/Del. To restore the factory
settings, press Select. If Select is pressed, "Restoring..." followed by
"Initializing...\" is displayed in the LCD. When the local date and time are
displayed on the LCD, the factory default settings have been restored.

View Info

This option allows users to view the current IP address and firmware version.
To view the information:
1. Press Menu.
2. Use the L or M keys to access the View Info submenu.
3. Press Select. The IP address and firmware version are displayed in the
telephone LCD.
54