Administrator Configuration; Figure 4-12 Web Login Screen - Uniden UIP300 Administrator's Manual

To change the password:
1. Enter the old password in the Current User Password field.
2. Enter the new password in the New User Password field.
The password consists of 6 ~10 digits. If the password entry is not valid, an error
message is displayed. To correct the password, click "Back to User Password
Change" and reenter the passwords.
3. Confirm the new password in the Confirm New Password field.
The new settings are stored in the flash memory of UIP300 and the page
is refreshed with the updated settings. If Refresh is clicked before
Submit, the values posted in the page are reset.
If the user password change is successful, the user will be prompted to log in
again using the new password.

Administrator Configuration

This menu allows Administrative users to review and modify the network
and/or the protocol configuration.
1. Start the web browser from a PC that is connected to the same IP
network as UIP300.
2. Check the IP address on the telephone and enter that IP address in the
web browser: http://169.254.1.10
3. When the Enter Network Password screen appears, enter the User Name
and Password. Click OK.
• At default the User Name is admin.
• The password is 6 ~ 10 digits. At default, the Password is 654321.

Figure 4-12 Web Login Screen

61