Clearing or Editing the 2-Touch Number
Step 1:
Enter the 2-Touch Dial sub-menu as describe above.
Step 2:
Press the 2-touch dial key (default is programmable key 6) and then press the
already-programmed dial key (0-9) you wish to clear or edit.
Step 3:
If you want to edit the phone number, change the number and press the
key. If you want to clear the phone number, simply press the
editing the phone number.
Step 4:
You will hear a long beep confirming your changes to the 2-touch dial key.
Phone Settings Sub-Menu
There are a total of six sub-menus inside the Phone Settings sub-menu. You can
only access the LCD Contrast, Adjust Time and Language sub-menus. The
Preferred Codec, Factory Reset and Auto Config sub-menus are available to
administrators only.
Changing the LCD Contrast
The LCD Contrast sub menu allows the user to configure the contrast setting of the
LCD display.
Step 1:
Press the
Step 2:
Scroll down to highlight the Phone Settings sub-menu and press
Step 3:
Highlight the LCD Contrast sub-menu and press
Step 4:
Use the ▲ and ▼ keys to set the LCD display to the desired contrast.
Step 5:
When the LCD display reaches the desired contrast level, press
setting. Press the
Changing the Display Language
You can set the language of the display to English, French, or Spanish.
Step 1:
Press the
key to enter the Setup menu
MENU
key to exit the sub-menu without saving.
CANCEL
key to enter the Setup menu
MENU
UIP200 User's Manual
MENU
key without
MENU
again.
MENU
.
MENU
to save the
MENU
Rev. 1.0, © UAC, May, 2004
Page 25 of 27