Table of Contents
Advertisement
The default password is 654321. If an incorrect password is entered, the
message "Incorrect Password" is displayed for one second. The Password
screen is returned and the password can be entered again.
5. Once the correct password is entered, the DHCP option is displayed (default
is Disabled). Press Select to access the Disabled screen.
6. Press Select to accept the Disabled option or press L to access the Enable
option.
If Disabled is the desired option, press Select. When the "Press Select to
Restart" message is displayed, press Cancel/Del to return to the Network
Config menu.
If using a static IP address, DHCP must be set to Disabled.
If Enabled is the desired option, press Select to accept the option. When the
"Press Select to Restart" message is displayed, press Cancel/Del to return
to the Network Config menu , or press Select to restart the telephone.
If enabled is selected, the IP address, Subnet Mask address and Default
Gateway address cannot be entered.
This selection is not recognized until the telephone has been reinitialized. When
the telephone has been restarted, the LCD shows "Initializing...\" and then
"Searching DHCP Server...". After initialization is complete, the telephone returns
to the time and date display.
16
Advertisement
Table of Contents
