Specifications; Physical Interface; Power Supply; Speaker - Uniden UIP300 Administrator's Manual

LED
Speaker/Headset Turned on when the
Mute
Message Waiting When there is 1 or
Indication
Line 1
Line 2
Function Keys
Speed Dial/
Voice Mail
Do Not Disturb
(DND)
The On and Off time for "Fast blinking" is 200 ms cycle and the time for "Slow
blinking" is 1 sec. cycle.

Specifications

The following specifications apply to the physical interface, power supply
and speaker.

Physical Interface

N 10/100 Base-T (RJ-45) x 1
N Handset (RJ-22) x 1
N Handset (phone jack - 2.5 mm) x 1
N DC Jack x 1

Power Supply

N DC 48V, 0.25A (Optional)
N Line Power (Power Dsign)

Speaker

N 8 Ω, 1 W
Table 1-1 LED Status
LED On
SPK/HS is pressed
While call is muted
more new voice mail(s) when
When in use
When in use
Turned on when the
key is pressed and it
remain on for
5 seconds.
While DND is activated N/A
LED Blinking
N/A
N/A
Arrival of Incoming Call
It is a regular call
It is a call waiting call
(Fast blinking)
When Line 1 is on hold.
(Slow blinking)
When incoming call
comes thru Line 1
(Fast blinking)
When Line 2 is on hold.
(Slow blinking).
When incoming call
comes thru Line 2
(Fast blinking)
N/A
11 11
LED Off
When not used
While not muted
when no more new
voice mail or no
incoming call
is waiting
When not in use
When not in use
Whenever any of the
following occurs:
• 5 seconds after it is
turned on
• When it returns to
on hook
• A different speed
dial key is pressed
While DND is off