Chapter 3 Basic Operations; General Information; Telephone Operations; Standby - Uniden UIP300 Administrator's Manual

General Information

There are several basic operations that the UIP300 performs. These include:

• Standby

• Originating a Call
• Receiving a Call
• 2-line Operation
• Setting the Volume

Telephone Operations

Standby
When the telephone is powered on, "Initializing...\" is shown while the
telephone is starting up. The last character on the LCD rotates, indicating that
the software is still running.
Before the telephone switches to standby mode, the firmware version is shown
on the LCD for five seconds (below is an example for the firmware version 1.00).

Chapter 3 Basic Operations

23