Quick Setup Procedure - Uniden UIP300 Administrator's Manual

H.323 ip phone

Hide thumbs Also See for UIP300:

Table of Contents

Quick Setup Procedure

This example provides steps for configuring an IP telephone via terminal based

configuration (User interface) and the web browser based configuration. Both

UIP300 terminal interface and the web browser are used when modifying the

information for the operation of UIP300.

This example assumes that UIP300 is connected to a Televantage

system.

The IP terminal must be configured, before the web browser is configured.

Terminal Configuration using UIP300

To access the Phone Configuration Menu and set up a telephone configuration:

1. Press Menu.

2. Use the L or M keys to access the Configuration menu, then press Select.

3. Use the L or M keys to access the Network Configuration menu,

then press Select.

4. When prompted to enter "Password" enter the password, then press Select.

Table of Contents

Uip300