Table of Contents
Advertisement
Feature Operations
The operation for the basic features of the UIP300 IP Phone are described in
this section.
Handsfree
This feature allows the user to make a call or receive a call without using the
handset. This feature is provided when using the speakerphone or the headset.
Speakerphone
When the Speaker/Headset key or one of the line keys is pressed (and the
headset is not plugged in), the user can listen from the built-in speaker and
can speak through the built-in microphone. If the handset goes off-hook while
the speakerphone is in use, the speakerphone is turned off and the handset
becomes active. If the handset is active and the speakerphone goes off-hook
(by pressing the Speaker/Headset) key, the handset becomes idle and the
speakerphone becomes active.
Headset
When the Speaker/Headset is pressed and the telephone detects that the
headset is plugged in, the voice path of the speakerphone and the
microphone (used by the speakerphone) is disabled and the speaker and
microphone inside the headset is activated.
Receiving a Call Using Handsfree
When the telephone rings, the user can press the Speaker/Headset
key or the line key with the flashing LED without picking up the handset. The
Speaker/Headset LED goes on and the LCD screen is the same as if the
user answered the call using the handset.
To disconnect the call, press the Speaker/Headset key. Pressing the line key
does not disconnect the call.
If the handset is picked up, the Handsfree feature is disabled and the
telephone returns to normal operation allowing conversation through
the handset.
Phone Book
The Phone Book feature allows users to store up to 50 telephone records.
Each records contains the following data fields:
N Name – alphanumeric identification of a party (stored phone book entry)
N Number – telephone number or extension of the party (stored phone
book entry)
28
Advertisement
Table of Contents
