Accessing A Line Using The Line Key; Volume Control; Handset Volume Control; Speakerphone Volume Control - Uniden UIP300 Administrator's Manual

H.323 ip phone

Hide thumbs Also See for UIP300:

Table of Contents

Accessing a Line Using the Line Key

Press Line 1 or Line 2 to access the appropriate line. When the line key is

pressed, the LED on the line key turns on indicating the selected line is in

use. If the handset is used, the user hears a dial tone through the handset.

If the handset is in the cradle and the telephone was originally on-hook,

pressing the line key causes the telephone to go off-hook and turns on the

handsfree feature. The user hears dial tone through the telephone speaker.

There are four volume settings:

N Handset

N Headset

N Speakerphone

N Ringer Volume

There are five volume levels for each volume.

To change the volume on the handset:

With the handset off-hook, press L (increase) or M (decrease) to adjust the

volume. The volume of the handset changes as the keys are pressed.

If no activity is detected for one second, the volume setting screen

disappears and returns the LCD to the original display and the volume setting

is saved.

When using speakerphone, the speakerphone volume is adjusted in the

same way that the handset volume is adjusted. Refer to "Handset Volume

Control" on this page.

Note that the speakerphone can only be adjusted if the headset is not

plugged in.

Table of Contents

Uip300