Change Administrator's Password; Figure 4-19 Administrator Password - Uniden UIP300 Administrator's Manual

Change Administrator's Password

This option allows the administrative user to change their password.

Figure 4-19 Administrator Password

To change the password:
1. Enter the Old Admin Password.
2. Enter the New Admin Password.
• The password is 6~10 digits.
• If the password is not valid, an error message is displayed. Return to the
Administrator Password screen by clicking "Back to administrator password
change" and repeat the process.
3. Enter the new password again in the Confirm Password field.
4. Click Submit.
• The new settings are stored in the flash memory of UIP300 and the telephone
resets.
• Click Refresh before clicking Submit to cancel the changes.
• When the password has been successfully changed, the "Enter Network
Password" box will prompt you to enter the new password.
68